Skip to product information
1 of 6

LCREA Shop

M5 Bottom Mic

M5 Bottom Mic

Regular price €325,00 EUR
Regular price €300,00 EUR Sale price €325,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

The M5 microphone for tom, kick, and hi-hat allows you to quickly improve the sound of percussion in the studio or live, without having to perform complex mixing:

  • Capsule tuned to 5kHz by Helmholtz resonance.
  • Adapted passive equalization: low-cut to eliminate unwanted frequencies and high-cut to eliminate the metallic side of the tom or cymbals.
  • Phase inverted: allows you to place the M5 under the snare drum or in front of the kick drum (kick).
  • Low-impedance balanced output with studio-quality transformer.
    _____________________________________________________________________ 

Example 1: Cajon sound capture, RE20 in the rear port, M5 on the strike at 40cm.

 

Raw sound without any processing (no EQ, no compression), without any plugin or additional hardware:

RE20 alone

M5 alone

M5+RE20

We can clearly see on the tracks of the 2 microphones, the almost perfect complementarity:

Thanks to Théo - Le Roi Gana

_____________________________________________________________________ 

Example 2: Drum kit recording

Configuration:
-Overhead with an AKG C451 microphone above the drum kit + M5 under the hi-hat 
-Snare drum with a SHURE SM57 microphone on top + M5 underneath
-Kick drum with an AUDIX D6 microphone in the port + M5 at the strike level

tracks M5 muted

tracks M5 enabled

The SM57 and D6 microphones go into a DBX266 compressing very heavily (which explains the strong resonance).
The M5 microphones are panned opposite to the overhead (slightly for the kick strike, a little more for the snare tom, strongly for the hi-hat).
No equalization or compression was done on the takes.

This sound capture uses 6 microphones, and only 3 inputs using the summing mixer  (but panning is no longer possible)    

_____________________________________________________________________ 

Example 3 : Snare drum sound capture, SM57 on top and M5 underneath, mixed at -15db.

 

audio example without any processing (raw sound)

SM57 alone (top)

SM57 (top) + M5 (bottom) at -12db

SM57 (top) + M5 (bottom) at -6db

Even mixed very low (-20db), the M5 microphone naturally brings clarity and impact to the snare drum sound capture, without having to do a phase alignment of the 2 microphones.

_____________________________________________________________________

Example 4: Drum kit kick drum sound capture, D6 in the rear port and M5 on the strike.

 

D6 alone

M5 alone

D6 + M5(-12db)

D6 + M5(-6db)

_____________________________________________________________________ 

Example 5 : Hi-hat sound capture, SM57 on the snare drum and M5 on the hi-hat mixed at -6db.

audio example without any processing (raw sound)

SM57 alone (on snare drum)

U87 alone (as overhead)

M5 alone (on hi-hat)

SM57 (snare drum) + U87 (overhead)

SM57 (snare drum) + M5 (hi-hat) + U87 (overhead)

We can see the contribution of the M5 microphone on the hi-hat, the snare drum sound is not modified.
No phase alignment is necessary.
The M5 reduces the bleed between the microphones to bring precision.
It naturally enhances the finesse of the cymbal playing: the small hi-hat opening in this example is clearly reproduced only with the addition of the M5.

_____________________________________

Product designed and made in France   

Technical Specifications:

Microphone Name M5 Bottom Mic
 Microphone Type Dynamic 
Polar Pattern  Cardioid - Phase inverted
Sensitivity 2mV/Pa at 1kHz
Sound Pressure 180db SPL
Impedance (Ohms)  70 Ohms 
Frequency Range 400 Hz - 15 kHz
Output Transformer Balanced output, Studio quality
Sound Sculpting Capsule tuned to 5kHz by Helmholtz resonance, 400Hz low-cut filter, 15kHz high-cut filter
Signal-to-Noise

Greater than 75 dB

Weight  250g
Dimensions 16 cm long, 4 cm diameter
Accessories Included Clamping clamp
Main Materials Gold-plated thermolaquered copper body
Available Customization Options Laser engraving (contact us)
Warranty 3 years
Manufacturing
Handmade in France

 

Available accessories:

View full details